BUYING INDUSTRIAL CHILLERS ACROSS FLORIDA TALK TO A BUYER (614) 715-3047
Industrial chiller equipment
INDUSTRIAL EQUIPMENT
REAL CHILLERS. REAL VALUE.

Practical selling guide

Chiller Freight, Loading and Hauling

Learn what to consider, what to share with a buyer, and how to coordinate a used chiller sale in Florida.

WATER-COOLED & AIR-COOLED • 20 TO 2,000+ TONS
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
01 / WHAT WE BUYINDUSTRIAL CHILLERS

Your chiller has value.
We'll make the move.

From a single unit to a facility changeout, we buy industrial chillers and handle the heavy lifting. We buy from decommissioned data centers, shut-down power plants and manufacturing facilities, hospital and campus closures, and hotel and resort renovations. Tell us what you have and we'll put together a cash offer.

Industrial chiller inside a mechanical room
THE EQUIPMENT WE BUY

BUILT FOR
BIG EQUIPMENT.

01

Water- & air-cooled

Industrial cooling equipment of all configurations.

02

Centrifugal, screw & scroll

We buy across major chiller types.

03

All sizes & refrigerants

From 20 to 2,000+ tons. All tonnages and refrigerants.

Tell us about your chiller
02 / HOW IT WORKSSTRAIGHTFORWARD FROM START TO FINISH

A simpler way to
move it on.

No testing. No freight bill. Just a straightforward way to turn your industrial chiller into cash.

01

Send the details.

Share a few details and photos of the chiller and its nameplate by form, text, or email.

02

Get a cash offer.

We'll review your equipment and make an offer. Payment is made upfront.

03

We handle the rest.

We handle recovery, disconnects, crane, rigging, loading and hauling. All freight is covered.

Start with a quote
03 / THE DETAILS

INDUSTRIAL CHILLER
BUYING IN FLORIDA

Start with the equipment and the project

This guide addresses a chiller with freight and hauling covered in Florida. Selling a machine involves more than stating its cooling capacity: the owner must identify what is included and consider how the buyer can reach it. We buy used and surplus commercial chillers throughout Florida, and all tonnages and refrigerants can be considered. A test run is not required. Even when a nameplate or service history is unavailable, an owner or authorized representative can begin a conversation by describing the equipment, its known condition and its location. The commercial agreement and the physical removal plan should be considered together.

Loading, freight and hauling are covered

We handle loading, freight and hauling for the agreed purchase, and all freight is covered. That does not eliminate the need to understand how a machine gets from its present location to the loading point. Tell us whether there is an available staging area, what access a vehicle may have and whether the equipment is still inside or on a roof. If the property has delivery or pickup rules, the facility contact can explain them before scheduling. The buyer and owner should confirm what is included in the removal scope, including any auxiliary items that are intended to travel with the chiller.

How the offer and removal fit together

A useful offer starts with the equipment being sold and the work needed to reach it. A clear photograph, an approximate location within the building and any available nameplate information can help us understand the opportunity. They are helpful starting points, not conditions for a conversation. If some details are unavailable, describe what you do know and point out the gaps. We can discuss a cash offer and the intended scope rather than asking you to guess at a machine's condition. Before any work is scheduled, the owner and buyer should agree which machine and accompanying items are included, the payment timing and how access will be arranged.

Refrigerant identification and recovery

All refrigerants can be considered; an owner does not need to identify the refrigerant before making contact. If information is available on a nameplate or in existing records, share it and specify which machine it refers to. Do not assume the original label necessarily describes the present contents. Refrigerant recovery is work for appropriately qualified professionals using a plan suited to the equipment and applicable requirements. We handle recovery as part of the agreed removal scope. Owners should not vent, release or attempt to recover refrigerant themselves merely to prepare a chiller for sale.

An idle machine can still be considered

Equipment may have been shut down because a facility changed its cooling arrangement, a replacement project began or the machine was no longer needed. Do not assume the reason for shutdown if it is not known. Share whether the unit appears intact, whether it remains connected and how long it has been idle if that information is available. A machine can be considered without being restarted or tested. These distinctions help the buyer understand the project, while the offer and the removal method remain subject to the actual equipment and an agreement with its owner.

Establish who can authorize the sale

A building manager, contractor and equipment owner may be different people. Before accepting a proposal, identify the party that owns the machine and the person authorized to agree to its sale and removal. If the property is leased, under renovation or changing hands, the relevant documents or responsible parties may need to be checked. Having access to a mechanical room does not by itself establish ownership. The buyer should know who can approve the commercial terms and who can arrange access on removal day. Where ownership is uncertain, resolve it with the appropriate parties rather than guessing.

Describe condition without guessing

A machine may be operational, idle, incomplete or of unknown condition. Those descriptions are different, and a buyer benefits from knowing which one applies. If a component has been removed, say what is known rather than assuming the rest of the machine is unusable. If the last operating date is unclear, explain that the date is unknown. Photos taken from a safe position can show visible condition and access, while records may add background if available. None of this requires a fresh operating test. The information helps frame an offer and the removal discussion, not a guaranteed valuation.

What to share when you contact us

If the chiller may be available, contact us with a description and the location in Florida. Existing labels, photos and records can help, but they are not prerequisites and the unit does not need to be tested. Explain whether anything must remain connected or operating around it and who has authority to approve the sale. We can discuss the cash offer, upfront payment and the appropriate recovery, disconnect, rigging and freight arrangements. The owner can decide whether the agreed scope suits the project.

  • Identify the equipment and the person authorized to sell it.
  • Share safe photographs or existing records if available; neither testing nor complete records are required.
  • Discuss access, included work, payment and timing before scheduling removal.

LET'S TALK EQUIPMENT

Ready to turn
your chiller
into cash?

Send us the details you have. Nameplate photos are especially helpful. We'll take it from there.

We buy chillers. We don't sell them.

GET STARTED

Request a Quote

Tell us a little about your equipment. Fields marked * are required.

Images only. 10 MB total across all photos.

Prefer to send photos directly? Text Nameplate Photos or call us at (614) 715-3047.

Request a Quote