Start with the equipment and the project
This guide addresses a surplus screw chiller in Daytona Beach, Florida. Selling a machine involves more than stating its cooling capacity: the owner must identify what is included and consider how the buyer can reach it. We buy used and surplus commercial chillers throughout Florida, and all tonnages and refrigerants can be considered. A test run is not required. Even when a nameplate or service history is unavailable, an owner or authorized representative can begin a conversation by describing the equipment, its known condition and its location. The commercial agreement and the physical removal plan should be considered together.
What to share about a screw chiller
A screw chiller should be identified by its available nameplate and overall configuration rather than by compressor type alone. Tell the buyer where the unit sits, whether it remains connected and whether there are known missing components. If information is uncertain, do not invent a model number or refrigerant. Some machines are accessible from an outdoor area while others have different site constraints; the actual property determines the handling plan. We can consider a unit without a test run. The agreed project can include qualified recovery and disconnect work, rigging, loading and covered freight.
Service planning starts with the actual property
The city or county tells us where a project is being considered, but it does not reveal where a particular machine is located within a property or how it can be removed. Tell us whether the unit is indoors, outside or on a roof, and share any access limits known to the facility team. Avoid assuming that a nearby buyer must have a local office or that every site has the same loading arrangements. We buy used chillers throughout Florida and coordinate the agreed work. The practical plan depends on the equipment, ownership, access and site schedule.
Plan the handoff to freight
The final loading point matters even when freight is covered. A removal team needs to understand whether the unit can be staged near a truck, whether the access route has restrictions and who will coordinate entry to the property. A rooftop or indoor machine may need additional handling before it reaches that point. Describe what you know and flag anything that still needs review. We handle the loading, freight and hauling included in the agreed purchase; the site-specific method depends on the machine and property. Confirm any required handoff with the facility contact before the scheduled work.
No test run is required
The equipment does not need to be started or tested for us to consider it. That can matter when a chiller is idle, disconnected, missing a component or no longer part of the active cooling plan. Describe the known condition honestly and distinguish what you have observed from information you do not have. A photograph or old service note may be useful, but neither is a prerequisite for making contact. Do not reconnect equipment or attempt a test simply to request an offer. The buyer can review available information and discuss any uncertainties as part of the proposed sale.
Loading, freight and hauling are covered
We handle loading, freight and hauling for the agreed purchase, and all freight is covered. That does not eliminate the need to understand how a machine gets from its present location to the loading point. Tell us whether there is an available staging area, what access a vehicle may have and whether the equipment is still inside or on a roof. If the property has delivery or pickup rules, the facility contact can explain them before scheduling. The buyer and owner should confirm what is included in the removal scope, including any auxiliary items that are intended to travel with the chiller.
Plan lifting and rigging around actual conditions
Rigging is a planning question, not a standard procedure that can be selected from the equipment name alone. The team must understand the load, available attachment information, clearances and the route to a loading area. If a crane is appropriate, its placement and the lift path must be evaluated against the actual property conditions. Other handling methods may be appropriate in different circumstances. We handle the crane and rigging work needed for the agreed project. Owners should not improvise a lift, move a heavy unit or rely on a cooling-capacity number as an estimate of weight.
What to share when you contact us
To begin, identify the equipment and the person who can approve its sale. Share any safe photographs or existing records, but do not worry if the nameplate or operating history is unavailable. Explain whether the unit is indoors, outdoors or on a roof, and identify any known access constraints. We can consider the chiller without a test and discuss an upfront cash offer and the agreed removal work, including covered freight. Confirm the scope, payment timing and site contacts before scheduling the work.
- Identify the equipment and the person authorized to sell it.
- Share safe photographs or existing records if available; neither testing nor complete records are required.
- Discuss access, included work, payment and timing before scheduling removal.