Start with the equipment and the project
Planning for a 600 to 999-ton chiller in West Palm Beach, Florida starts by separating two questions: what is being sold, and how can it be removed safely? The answers depend on the actual machine and property, not on a standard assumption about every chiller. We buy used and surplus equipment in Florida, consider all tonnages and refrigerants, and do not require a test run. An owner can share any existing details about the unit, its connections and its location without diagnosing it. Early coordination makes the offer and removal conversation easier to understand.
Cooling capacity is not shipping weight
Chiller capacity is commonly described in tons of cooling. That number is useful for identifying the equipment, but it is not the machine's physical weight and cannot be used on its own to select a crane or transport vehicle. A nameplate, equipment documentation or an existing record may show the capacity; if not, share an approximation and explain its source. For removal, the team also needs reliable dimensions, weight information when available and a clear understanding of the lift path. All tonnages can be considered. Never assume that two machines with similar cooling ratings have identical handling requirements.
Service planning starts with the actual property
The city or county tells us where a project is being considered, but it does not reveal where a particular machine is located within a property or how it can be removed. Tell us whether the unit is indoors, outside or on a roof, and share any access limits known to the facility team. Avoid assuming that a nearby buyer must have a local office or that every site has the same loading arrangements. We buy used chillers throughout Florida and coordinate the agreed work. The practical plan depends on the equipment, ownership, access and site schedule.
Separate electrical and mechanical disconnect planning
A chiller may have electrical, control, refrigerant and fluid connections, each of which should be considered in the removal scope. The fact that a machine is not running does not establish that every connection is isolated. Tell the buyer whether the equipment remains connected and identify the facility contact who understands the surrounding system. We handle necessary disconnects as agreed, using appropriately qualified personnel. The owner should not cut, open or energize connections for the purpose of requesting an offer. The people responsible for the site can coordinate the work so equipment outside the sale is clearly distinguished.
No test run is required
The equipment does not need to be started or tested for us to consider it. That can matter when a chiller is idle, disconnected, missing a component or no longer part of the active cooling plan. Describe the known condition honestly and distinguish what you have observed from information you do not have. A photograph or old service note may be useful, but neither is a prerequisite for making contact. Do not reconnect equipment or attempt a test simply to request an offer. The buyer can review available information and discuss any uncertainties as part of the proposed sale.
Plan the handoff to freight
The final loading point matters even when freight is covered. A removal team needs to understand whether the unit can be staged near a truck, whether the access route has restrictions and who will coordinate entry to the property. A rooftop or indoor machine may need additional handling before it reaches that point. Describe what you know and flag anything that still needs review. We handle the loading, freight and hauling included in the agreed purchase; the site-specific method depends on the machine and property. Confirm any required handoff with the facility contact before the scheduled work.
Keep a separate inventory for each chiller
When more than one machine may be sold, identify each one separately rather than describing the group as a single unit. A simple list can pair the available nameplate details and photographs with the location and known condition of each chiller. Note which units remain connected and which are already out of service, if known. If the information is incomplete, mark the gap instead of assigning one machine's details to another. Discuss whether the owner wants one combined scope or a phased removal. A coordinated proposal depends on the actual equipment, access and site schedule.
What to share when you contact us
If the chiller may be available, contact us with a description and the location in Florida. Existing labels, photos and records can help, but they are not prerequisites and the unit does not need to be tested. Explain whether anything must remain connected or operating around it and who has authority to approve the sale. We can discuss the cash offer, upfront payment and the appropriate recovery, disconnect, rigging and freight arrangements. The owner can decide whether the agreed scope suits the project.
- Identify the equipment and the person authorized to sell it.
- Share safe photographs or existing records if available; neither testing nor complete records are required.
- Discuss access, included work, payment and timing before scheduling removal.