Start with the equipment and the project
An inquiry about a used chiller with an available nameplate in Florida can begin with a straightforward description rather than a complete technical file. Explain which chiller is no longer needed, where it sits and whether it remains connected, if known. We buy used and surplus chillers throughout Florida; all tonnages and refrigerants can be considered and testing is not required. The actual offer and handling plan depend on the machine and site. Identifying the owner and the boundaries of the proposed sale is as important as identifying a manufacturer or cooling capacity.
Use the nameplate without relying on it exclusively
If it is safe and accessible, a photograph of the equipment nameplate can help identify the manufacturer, model, serial number and rated capacity. Do not remove covers or approach energized equipment simply to take a picture. If a plate is faded, blocked or missing, say so and share whatever identifying information is already available. A broad photograph of the whole machine and its surroundings can provide additional context. Old records can also be useful, but a service history is not required. Each label should be matched to the correct unit when several similar machines are present.
How the offer and removal fit together
A useful offer starts with the equipment being sold and the work needed to reach it. A clear photograph, an approximate location within the building and any available nameplate information can help us understand the opportunity. They are helpful starting points, not conditions for a conversation. If some details are unavailable, describe what you do know and point out the gaps. We can discuss a cash offer and the intended scope rather than asking you to guess at a machine's condition. Before any work is scheduled, the owner and buyer should agree which machine and accompanying items are included, the payment timing and how access will be arranged.
Plan the handoff to freight
The final loading point matters even when freight is covered. A removal team needs to understand whether the unit can be staged near a truck, whether the access route has restrictions and who will coordinate entry to the property. A rooftop or indoor machine may need additional handling before it reaches that point. Describe what you know and flag anything that still needs review. We handle the loading, freight and hauling included in the agreed purchase; the site-specific method depends on the machine and property. Confirm any required handoff with the facility contact before the scheduled work.
An idle machine can still be considered
Equipment may have been shut down because a facility changed its cooling arrangement, a replacement project began or the machine was no longer needed. Do not assume the reason for shutdown if it is not known. Share whether the unit appears intact, whether it remains connected and how long it has been idle if that information is available. A machine can be considered without being restarted or tested. These distinctions help the buyer understand the project, while the offer and the removal method remain subject to the actual equipment and an agreement with its owner.
Define responsibilities before the crew arrives
A clear project discussion identifies who is supplying access, who speaks for the owner and which removal tasks the buyer will handle. We handle crane and rigging, refrigerant recovery, disconnects, loading, freight and hauling as needed under the agreed scope. The facility contact can explain site-specific rules, operational constraints and the location of the equipment. If another contractor is involved, clarify the handoff between parties rather than leaving it implicit. Keep the commercial agreement and the site plan aligned so everyone knows which machine is being purchased and what is expected on the day of removal.
Plan lifting and rigging around actual conditions
Rigging is a planning question, not a standard procedure that can be selected from the equipment name alone. The team must understand the load, available attachment information, clearances and the route to a loading area. If a crane is appropriate, its placement and the lift path must be evaluated against the actual property conditions. Other handling methods may be appropriate in different circumstances. We handle the crane and rigging work needed for the agreed project. Owners should not improvise a lift, move a heavy unit or rely on a cooling-capacity number as an estimate of weight.
What to share when you contact us
If the chiller may be available, contact us with a description and the location in Florida. Existing labels, photos and records can help, but they are not prerequisites and the unit does not need to be tested. Explain whether anything must remain connected or operating around it and who has authority to approve the sale. We can discuss the cash offer, upfront payment and the appropriate recovery, disconnect, rigging and freight arrangements. The owner can decide whether the agreed scope suits the project.
- Identify the equipment and the person authorized to sell it.
- Share safe photographs or existing records if available; neither testing nor complete records are required.
- Discuss access, included work, payment and timing before scheduling removal.