BUYING INDUSTRIAL CHILLERS ACROSS FLORIDA TALK TO A BUYER (614) 715-3047
Industrial chiller equipment
INDUSTRIAL EQUIPMENT
REAL CHILLERS. REAL VALUE.

Chiller selling guide

Sell a Aaon Chiller in Fort Myers, Florida

Explore how to sell a used Aaon chiller in Fort Myers, Florida with a clear offer and coordinated removal.

WATER-COOLED & AIR-COOLED • 20 TO 2,000+ TONS
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
01 / WHAT WE BUYINDUSTRIAL CHILLERS

Your chiller has value.
We'll make the move.

From a single unit to a facility changeout, we buy industrial chillers and handle the heavy lifting. We buy from decommissioned data centers, shut-down power plants and manufacturing facilities, hospital and campus closures, and hotel and resort renovations. Tell us what you have and we'll put together a cash offer.

Industrial chiller inside a mechanical room
THE EQUIPMENT WE BUY

BUILT FOR
BIG EQUIPMENT.

01

Water- & air-cooled

Industrial cooling equipment of all configurations.

02

Centrifugal, screw & scroll

We buy across major chiller types.

03

All sizes & refrigerants

From 20 to 2,000+ tons. All tonnages and refrigerants.

Tell us about your chiller
02 / HOW IT WORKSSTRAIGHTFORWARD FROM START TO FINISH

A simpler way to
move it on.

No testing. No freight bill. Just a straightforward way to turn your industrial chiller into cash.

01

Send the details.

Share a few details and photos of the chiller and its nameplate by form, text, or email.

02

Get a cash offer.

We'll review your equipment and make an offer. Payment is made upfront.

03

We handle the rest.

We handle recovery, disconnects, crane, rigging, loading and hauling. All freight is covered.

Start with a quote
03 / THE DETAILS

INDUSTRIAL CHILLER
BUYING IN FLORIDA

Start with the equipment and the project

This guide addresses a used Aaon chiller in Fort Myers, Florida. Selling a machine involves more than stating its cooling capacity: the owner must identify what is included and consider how the buyer can reach it. We buy used and surplus commercial chillers throughout Florida, and all tonnages and refrigerants can be considered. A test run is not required. Even when a nameplate or service history is unavailable, an owner or authorized representative can begin a conversation by describing the equipment, its known condition and its location. The commercial agreement and the physical removal plan should be considered together.

Service planning starts with the actual property

The city or county tells us where a project is being considered, but it does not reveal where a particular machine is located within a property or how it can be removed. Tell us whether the unit is indoors, outside or on a roof, and share any access limits known to the facility team. Avoid assuming that a nearby buyer must have a local office or that every site has the same loading arrangements. We buy used chillers throughout Florida and coordinate the agreed work. The practical plan depends on the equipment, ownership, access and site schedule.

Identify the actual machine, not just the brand

The manufacturer name is a useful starting point, but it does not by itself identify a chiller's model, capacity, refrigerant, weight or present condition. If an accessible nameplate or equipment record is available, share its details along with a safe photograph of the full unit. If the model cannot be read, describe the machine and its surroundings instead; the absence of a label does not prevent an initial discussion. We are a buyer of used equipment, not a claim of manufacturer authorization or affiliation. The offer and removal approach depend on the actual unit and agreed scope.

Keep preliminary information gathering safe

Information for an offer should be collected from areas the facility has already made safe and accessible. A visual description, a photograph taken from a permitted position or an existing record may be enough to begin. Do not remove panels, work on electrical equipment, disconnect piping or attempt to handle refrigerant to prepare for a buyer. A unit that is silent may still have connected systems or stored energy. We handle the agreed recovery and disconnect work through appropriate qualified personnel. Site-specific hazards and access rules should be discussed with the responsible facility contact.

Cash offers and payment before removal

We make cash offers and provide payment upfront on the agreed terms. Ask how the proposed payment, equipment description and work scope relate to one another before accepting an offer. For example, an offer for one disconnected machine is not necessarily the same as a proposal involving several machines still tied into a shared system. Clarifying that distinction avoids treating an informal estimate as a finished agreement. There is no promise of a particular price: capacity, identifiable equipment, condition and access are among the details that may affect the proposed transaction. Confirm who can approve the agreement for the owner.

Identify equipment and connections that must remain

A chiller can sit beside pumps, controls, piping and other machinery that are not part of the sale. Some connections may serve more than one piece of equipment, so a visual boundary around the machine is not always the whole project boundary. Identify the intended unit and let the facility's knowledgeable contact explain what must stay in service. Do not label a shared component as surplus merely because it is nearby. The buyer and owner should agree whether any auxiliary items are included and how the necessary disconnects will be coordinated before work starts.

Plan lifting and rigging around actual conditions

Rigging is a planning question, not a standard procedure that can be selected from the equipment name alone. The team must understand the load, available attachment information, clearances and the route to a loading area. If a crane is appropriate, its placement and the lift path must be evaluated against the actual property conditions. Other handling methods may be appropriate in different circumstances. We handle the crane and rigging work needed for the agreed project. Owners should not improvise a lift, move a heavy unit or rely on a cooling-capacity number as an estimate of weight.

What to share when you contact us

Tell us what you know about the chiller and what you do not. The location, approximate capacity, manufacturer, condition and surrounding access are useful when available, but missing information does not require a test run. The owner or authorized representative can review the cash offer and upfront payment terms alongside the proposed removal plan. We handle the agreed recovery, disconnects, crane and rigging as needed, and the loading and freight. Freight is covered. Clarify what is included before agreeing to a schedule.

  • Identify the equipment and the person authorized to sell it.
  • Share safe photographs or existing records if available; neither testing nor complete records are required.
  • Discuss access, included work, payment and timing before scheduling removal.

LET'S TALK EQUIPMENT

Ready to turn
your chiller
into cash?

Send us the details you have. Nameplate photos are especially helpful. We'll take it from there.

We buy chillers. We don't sell them.

GET STARTED

Request a Quote

Tell us a little about your equipment. Fields marked * are required.

Images only. 10 MB total across all photos.

Prefer to send photos directly? Text Nameplate Photos or call us at (614) 715-3047.

Request a Quote