BUYING INDUSTRIAL CHILLERS ACROSS FLORIDA TALK TO A BUYER (614) 715-3047
Industrial chiller equipment
INDUSTRIAL EQUIPMENT
REAL CHILLERS. REAL VALUE.

Chiller selling guide

Sell a Smardt Chiller in Sarasota, Florida

Explore how to sell a used Smardt chiller in Sarasota, Florida with a clear offer and coordinated removal.

WATER-COOLED & AIR-COOLED • 20 TO 2,000+ TONS
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
01 / WHAT WE BUYINDUSTRIAL CHILLERS

Your chiller has value.
We'll make the move.

From a single unit to a facility changeout, we buy industrial chillers and handle the heavy lifting. We buy from decommissioned data centers, shut-down power plants and manufacturing facilities, hospital and campus closures, and hotel and resort renovations. Tell us what you have and we'll put together a cash offer.

Industrial chiller inside a mechanical room
THE EQUIPMENT WE BUY

BUILT FOR
BIG EQUIPMENT.

01

Water- & air-cooled

Industrial cooling equipment of all configurations.

02

Centrifugal, screw & scroll

We buy across major chiller types.

03

All sizes & refrigerants

From 20 to 2,000+ tons. All tonnages and refrigerants.

Tell us about your chiller
02 / HOW IT WORKSSTRAIGHTFORWARD FROM START TO FINISH

A simpler way to
move it on.

No testing. No freight bill. Just a straightforward way to turn your industrial chiller into cash.

01

Send the details.

Share a few details and photos of the chiller and its nameplate by form, text, or email.

02

Get a cash offer.

We'll review your equipment and make an offer. Payment is made upfront.

03

We handle the rest.

We handle recovery, disconnects, crane, rigging, loading and hauling. All freight is covered.

Start with a quote
03 / THE DETAILS

INDUSTRIAL CHILLER
BUYING IN FLORIDA

Start with the equipment and the project

This guide addresses a used Smardt chiller in Sarasota, Florida. Selling a machine involves more than stating its cooling capacity: the owner must identify what is included and consider how the buyer can reach it. We buy used and surplus commercial chillers throughout Florida, and all tonnages and refrigerants can be considered. A test run is not required. Even when a nameplate or service history is unavailable, an owner or authorized representative can begin a conversation by describing the equipment, its known condition and its location. The commercial agreement and the physical removal plan should be considered together.

Service planning starts with the actual property

The city or county tells us where a project is being considered, but it does not reveal where a particular machine is located within a property or how it can be removed. Tell us whether the unit is indoors, outside or on a roof, and share any access limits known to the facility team. Avoid assuming that a nearby buyer must have a local office or that every site has the same loading arrangements. We buy used chillers throughout Florida and coordinate the agreed work. The practical plan depends on the equipment, ownership, access and site schedule.

Identify the actual machine, not just the brand

The manufacturer name is a useful starting point, but it does not by itself identify a chiller's model, capacity, refrigerant, weight or present condition. If an accessible nameplate or equipment record is available, share its details along with a safe photograph of the full unit. If the model cannot be read, describe the machine and its surroundings instead; the absence of a label does not prevent an initial discussion. We are a buyer of used equipment, not a claim of manufacturer authorization or affiliation. The offer and removal approach depend on the actual unit and agreed scope.

An idle machine can still be considered

Equipment may have been shut down because a facility changed its cooling arrangement, a replacement project began or the machine was no longer needed. Do not assume the reason for shutdown if it is not known. Share whether the unit appears intact, whether it remains connected and how long it has been idle if that information is available. A machine can be considered without being restarted or tested. These distinctions help the buyer understand the project, while the offer and the removal method remain subject to the actual equipment and an agreement with its owner.

Define responsibilities before the crew arrives

A clear project discussion identifies who is supplying access, who speaks for the owner and which removal tasks the buyer will handle. We handle crane and rigging, refrigerant recovery, disconnects, loading, freight and hauling as needed under the agreed scope. The facility contact can explain site-specific rules, operational constraints and the location of the equipment. If another contractor is involved, clarify the handoff between parties rather than leaving it implicit. Keep the commercial agreement and the site plan aligned so everyone knows which machine is being purchased and what is expected on the day of removal.

How the offer and removal fit together

A useful offer starts with the equipment being sold and the work needed to reach it. A clear photograph, an approximate location within the building and any available nameplate information can help us understand the opportunity. They are helpful starting points, not conditions for a conversation. If some details are unavailable, describe what you do know and point out the gaps. We can discuss a cash offer and the intended scope rather than asking you to guess at a machine's condition. Before any work is scheduled, the owner and buyer should agree which machine and accompanying items are included, the payment timing and how access will be arranged.

Plan lifting and rigging around actual conditions

Rigging is a planning question, not a standard procedure that can be selected from the equipment name alone. The team must understand the load, available attachment information, clearances and the route to a loading area. If a crane is appropriate, its placement and the lift path must be evaluated against the actual property conditions. Other handling methods may be appropriate in different circumstances. We handle the crane and rigging work needed for the agreed project. Owners should not improvise a lift, move a heavy unit or rely on a cooling-capacity number as an estimate of weight.

What to share when you contact us

Gather only information that is already safe and available: the machine location, visible identifying details, known condition and the facility contact. If something is uncertain, say so rather than guessing. We consider all tonnages and refrigerants and do not require testing. Our cash offer and upfront payment terms are discussed with the owner, together with the work needed for removal and the covered freight. Before scheduling, confirm which unit and any auxiliary items are included and how the crew will access the property.

  • Identify the equipment and the person authorized to sell it.
  • Share safe photographs or existing records if available; neither testing nor complete records are required.
  • Discuss access, included work, payment and timing before scheduling removal.

LET'S TALK EQUIPMENT

Ready to turn
your chiller
into cash?

Send us the details you have. Nameplate photos are especially helpful. We'll take it from there.

We buy chillers. We don't sell them.

GET STARTED

Request a Quote

Tell us a little about your equipment. Fields marked * are required.

Images only. 10 MB total across all photos.

Prefer to send photos directly? Text Nameplate Photos or call us at (614) 715-3047.

Request a Quote