Start with the equipment and the project
This page is about a chiller that needs an electrical disconnect in Florida and the decisions that accompany a used-equipment sale. A non-running machine, an incomplete label or an uncertain service history can still be discussed; do not start or dismantle equipment just to ask for an offer. We buy commercial chillers throughout Florida and consider all refrigerants and tonnages. The owner should identify the machine and the person who can approve its sale, while the facility contact can help explain access. Removal and payment details are then addressed in the proposed agreement.
Separate electrical and mechanical disconnect planning
A chiller may have electrical, control, refrigerant and fluid connections, each of which should be considered in the removal scope. The fact that a machine is not running does not establish that every connection is isolated. Tell the buyer whether the equipment remains connected and identify the facility contact who understands the surrounding system. We handle necessary disconnects as agreed, using appropriately qualified personnel. The owner should not cut, open or energize connections for the purpose of requesting an offer. The people responsible for the site can coordinate the work so equipment outside the sale is clearly distinguished.
Cash offers and payment before removal
We make cash offers and provide payment upfront on the agreed terms. Ask how the proposed payment, equipment description and work scope relate to one another before accepting an offer. For example, an offer for one disconnected machine is not necessarily the same as a proposal involving several machines still tied into a shared system. Clarifying that distinction avoids treating an informal estimate as a finished agreement. There is no promise of a particular price: capacity, identifiable equipment, condition and access are among the details that may affect the proposed transaction. Confirm who can approve the agreement for the owner.
Plan lifting and rigging around actual conditions
Rigging is a planning question, not a standard procedure that can be selected from the equipment name alone. The team must understand the load, available attachment information, clearances and the route to a loading area. If a crane is appropriate, its placement and the lift path must be evaluated against the actual property conditions. Other handling methods may be appropriate in different circumstances. We handle the crane and rigging work needed for the agreed project. Owners should not improvise a lift, move a heavy unit or rely on a cooling-capacity number as an estimate of weight.
Keep a separate inventory for each chiller
When more than one machine may be sold, identify each one separately rather than describing the group as a single unit. A simple list can pair the available nameplate details and photographs with the location and known condition of each chiller. Note which units remain connected and which are already out of service, if known. If the information is incomplete, mark the gap instead of assigning one machine's details to another. Discuss whether the owner wants one combined scope or a phased removal. A coordinated proposal depends on the actual equipment, access and site schedule.
Use the nameplate without relying on it exclusively
If it is safe and accessible, a photograph of the equipment nameplate can help identify the manufacturer, model, serial number and rated capacity. Do not remove covers or approach energized equipment simply to take a picture. If a plate is faded, blocked or missing, say so and share whatever identifying information is already available. A broad photograph of the whole machine and its surroundings can provide additional context. Old records can also be useful, but a service history is not required. Each label should be matched to the correct unit when several similar machines are present.
Identify equipment and connections that must remain
A chiller can sit beside pumps, controls, piping and other machinery that are not part of the sale. Some connections may serve more than one piece of equipment, so a visual boundary around the machine is not always the whole project boundary. Identify the intended unit and let the facility's knowledgeable contact explain what must stay in service. Do not label a shared component as surplus merely because it is nearby. The buyer and owner should agree whether any auxiliary items are included and how the necessary disconnects will be coordinated before work starts.
What to share when you contact us
Tell us what you know about the chiller and what you do not. The location, approximate capacity, manufacturer, condition and surrounding access are useful when available, but missing information does not require a test run. The owner or authorized representative can review the cash offer and upfront payment terms alongside the proposed removal plan. We handle the agreed recovery, disconnects, crane and rigging as needed, and the loading and freight. Freight is covered. Clarify what is included before agreeing to a schedule.
- Identify the equipment and the person authorized to sell it.
- Share safe photographs or existing records if available; neither testing nor complete records are required.
- Discuss access, included work, payment and timing before scheduling removal.